Cooper Security i-on40 Installationsanleitung PDF herunterladen (Seite 65)

i-on40 Installer Mode Programming

Page 61

Downloading

Deals with setting up phone numbers, account

numbers for the downloader, and controlling the type

of connection you wish to allow.

Note: Apart from Downloading and IP Network (Own), the

above menu items appear only if the appropriate

module is fitted.

The control unit is designed to alert the user if it fails to

complete a programmed communication. If alarm

reporting fails then the keypad displays an alert by

lighting the red LEDs around the navigation keys.

Although the user may acknowledge the alert, the control

unit will not remove the alert until communication is

completed successfully.

If you wish to remove a communications module from

a system, ensure that you first disable communications in

the appropriate menus:

To remove a: Disable:

i-sd02, i-gsm02 ARC Reporting, Speech Dialler, SMS

GPRS, Ethernet ARC Reporting, IP Network

Otherwise the control unit will continually report a

communications failure.

ARC Reporting

To program how the control unit will communicate with

an ARC select Communications - ARC Reporting.

Call Mode

To choose the call mode for communicating with an ARC

select: Communications – ARC Reporting – Call Mode. The

call modes available are:

Disabled.

The control unit disables all ARC communications.

Single.

The control unit reports to the first telephone number

in the Phone Book, using a single account number

(see "Account Numbers" on page 63).

Operation: The control unit dials the number and

attempts to connect with the ARC. If the call fails, the

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 115 116

Keine Kommentare

Cooper Security i-on40 Installationsanleitung Seite 65