Cooper Security i-on40 Installationsanleitung PDF herunterladen (Seite 28)

Installer Mode Programming i-on40

Page 24

1. Select Detectors/Devices – External Siren – Add/Del Ext

Siren.

The display shows four possible “memory slots” for

external sirens. A slot already allocated to a siren

shows a “*” at the beginning of its line.

2. Select an empty memory slot.

The display shows a message asking you to operate

the siren’s tamper.

3. Operate the siren’s tamper.

The control unit learns the siren’s identity and gives a

double beep.

Allocating Sirens To Partitions

Note: By default all sirens are assigned to all partitions.

To allocate a siren to a partition:

1. Select Detectors/Devices – External Siren – Partitions.

Note: This menu does not appear if you are using a Part

Setting system. To change to a Partitioned system

see System Options – Restore Defaults – Factory Defaults

on page 53 .

The bottom line of the display shows the first of the

four possible sirens.

2. Select the siren you wish to allocate.

The bottom line of the display shows the first

partition.

3. Scroll through the list of partitions for that siren. Use

the > or < keys to change the status of the siren.

“Yes” means the siren is allocated to that partition.

4. Press Y to save your changes and return to the list of

sirens.

Deleting an External Siren

To remove an external siren from the system:

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 115 116

Keine Kommentare

Cooper Security i-on40 Installationsanleitung Seite 28