Cooper Security i-on40 Installationsanleitung PDF herunterladen (Seite 49)

i-on40 Installer Mode Programming

Page 45

Partition a name. The control unit displays this name

to the user during setting.

Exit Mode

The exit modes available are:

Timed Set Use this option to make the system set

after a delay. Use the Exit Time menu

(see page 46) to choose the delay.

Final Door

Set

Use this option to complete setting the

system by closing a door fitted with a

Final Exit zone detector. Note that the

exit time is infinite in this option.

Note 1: If you wish to use Final Door

Set exit mode when part setting

then:

a) Make sure that you include a

zone with the Final Exit type as one

of the part set zones.

b) Make sure you select “Final

Door” in Part Set Final Exit As (see

page 47).

Note 2: If you wish to use Final Door

Set exit mode for a Partition then

make sure you include a zone with

the type Final Exit in the Partition.

Note 3: Do not try to make a PIR zone

act as a Final Exit. Radio PIR

detectors have a “lock out” period

after each activation in order to

conserve battery power. When you

set (or part set) the system a PIR

may still be in lockout, during which

it cannot send a signal to complete

the setting process.

Instant Set The system sets immediately and

without any setting tone. The keypad(s)

give confirmation tone when the system

is set.

Silent Set The system sets after the time

programmed in the Entry/Exit Time

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 115 116

Kommentare zu diesen Handbüchern

Keine Kommentare

Cooper Security i-on40 Installationsanleitung Seite 49

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Cooper Security i-on40