Cooper Security i-on40 Installationsanleitung PDF herunterladen (Seite 12)

Installer Mode Programming i-on40

Page 8

one character and you can insert a new character in the

empty space.

To move the cursor left or right press u or n

respectively. To delete characters press <.

Note: If you wish to leave a name or text unchanged then

press

. The display leaves the name change screen

and restores the name to its previous value.

Press

Y when you have finished entering text.

Detectors/Devices

Processing Priority

When several detectors are activated at the same time,

the control unit always processes PA and Normal Alarm

detectors first, followed by Fire, and then all other alarm

types. The control unit always processes alarms before

Alerts.

Detectors

Zone Numbering

The total number of zones available on the i-on40

depends on the wiring method you have selected for the

hardwired zones in menu item System Options – Wired Zone

Type on page 48 .

If you selected one of the Fully Supervised Loop (FSL)

options then the i-on40 has 40 zones, numbered

consecutively 1 to 40. Wired detectors occupy zone

numbers 1 to 16 and radio detectors occupy zones 17 to

40.

If you selected 4-Wire Closed Circuit then the i-on40 has

a total of 32 zones. Wired detectors occupy zones 1 to 8,

while radio detectors occupy zones 17 to 40.

Note that radio detectors ALWAYS occupy zones 17 to 40.

Adding or Deleting Radio Detectors

To use a radio zone the control unit must learn the

identity of the radio detector. To learn radio detectors

select Detectors/Devices - Detectors – Add/Delete Detectors.

The bottom line of the display shows the first of the radio

detector zones: zone 17.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 115 116

Keine Kommentare

Cooper Security i-on40 Installationsanleitung Seite 12