Cooper Security i-on160EX Installationsanleitung Seite 135

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 180
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 134
i-on160 Step by Step Programming Procedures
Page 129
Deleting a WAM
To remove a WAM from service in the system:
1. Enter Installer Menu.
INSTALLER MENU
Detectors/Devices >
2. Press Y.
DETECTORS/DEVICES
Detectors >
3. Press n until the display shows:
DETECTORS/DEVICES
WAMs >
4. Press Y.
WAMs
Add/Del WAM >
5. Press Y.
The bottom line of the display shows the first of
the available radio expanders.
ADD/DEL WAM
Exp. R1-02 (R30)>
6. Press u or n to select the radio expander
allocated to the WAM you wish to delete.
Note: This example assumes that your radio
expanders are bus devices 02 and 05. The
numbers may be different on the system you
are working on.
ADD/DEL WAM
Exp. R1-05 (R10)>
7. Press Y.
The display shows the first in a list of the
available WAM device addresses on the selected
expander.
ADD/DEL WAM
WAM R1-05-01 >
8. Press u or n until you see the WAM you wish to
remove:
ADD/DEL WAM
*WAM 02 >
9. Press Y .
The bottom line of the display asks if you wish to
delete the selected WAM.
ADD/DEL WAM
Delete WAM?
10. Press Y.
The bottom line of the display asks you to
confirm that you wish to delete the WAM.
ADD/DEL WAM
Are you sure?
11. Press Y.
The control unit removes the identity of the WAM
from that WAM device address (note that the “*”
has gone from the beginning of the bottom line).
The display shows that the control unit is now
ready to select another WAM.
ADD/DEL WAM
WAM R1-05-02 >
Seitenansicht 134
1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 179 180

Kommentare zu diesen Handbüchern

Keine Kommentare