Cooper Security 9751 Installationshandbuch Seite 20
- Seite / 148
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
2. Technical Description
Page 12 496964
Standby battery (not supplied) 12V rechargeable lead-acid, gel-type battery.
Low battery voltage cutoff = 10V.
Recommended manufacturers: Yuassa, Yucel
or Fiamm. A 17Ah battery can be fitted only in
a large case.
Note: 17Ah battery – max recharge time: 50 hrs, fitting kit: 8136EUR-02.
Outputs
9751
OP 1, 2, 3 Open-collector transistor outputs, 500mA,
12VDC, negative applied.
9752
OP 1 and 2 Voltage-free, single-pole relay contacts, rated
24VDC @ 1A.
OP3 Open-collector transistor output, 500mA,
12VDC, negative applied.
9851
OP 1 and 2 Voltage-free, single-pole relay contacts, rated
24VDC @ 1A.
OP 3 and 4 Open-collector transistor output, 500mA,
12VDC, negative applied.
ST Siren Test 14.4VDC (for use in France only)
All Models
LS Supports two parallel-connected, externally
mounted loudspeakers for internal sounder or
EE tones: minimum speaker impedance 16Ω.
AUX 500mA, 12VDC minimum, 13.8VDC
maximum, ripple ±2% maximum.
Communications OP1-8* 12V logic outputs, negative applied in alarm
(positive removed), 50mA maximum.
* These outputs appear as pins on the connector for the plug-by
communicator. See "3. Installation – Fitting a Plug-by Communicator".
Inputs
TR Tamper return for Bell
Tellback/Remote reset** +12V applied to operate reset.
Line Fault input** +12V applied to indicate line failure.
** These inputs appear as pins on the connector for the plug-by
communicator. See "3. Installation – Fitting a Plug-by Communicator".
- Contents 3
- List of Figures 7
- Page vi 496964 8
- 1. INTRODUCTION 9
- Features of the Control Unit 10
- 1. Introduction 11
- 496964 Page 3 11
- Elements of the IAS 12
- 496964 Page 5 13
- 1. Introduction 14
- Page 6 496964 14
- Expanders 15
- Page 8 496964 16
- Partitioned or Single System 17
- User Control 17
- Page 10 496964 18
- 2. TECHNICAL DESCRIPTION 19
- Outputs 20
- Compatible Equipment 21
- Control Unit PCB Layouts 21
- 2. Technical Description 22
- Page 14 496964 22
- 2. Technical Description 23
- 496964 Page 15 23
- Page 16 496964 24
- 496964 Page 17 25
- Radio Expander PCB Layouts 26
- 9960 Radio Expander 27
- Page 20 496964 28
- 3. INSTALLATION 29
- 3. Installation 30
- Page 22 496964 30
- Fitting the System 31
- Page 24 496964 32
- 3. Installation 33
- 496964 Page 25 33
- Wiring the Control Unit 34
- Keypads 35
- Page 28 496964 36
- 496964 Page 29 37
- Connecting Detector Circuits 38
- 496964 Page 31 39
- Connecting Expanders 40
- Addressing Expanders 41
- Programming Outputs 42
- Communicator 43
- Page 36 496964 44
- Statutory Information 45
- Safety Notice 46
- 496964 Page 39 47
- Page 40 496964 48
- Page 42 496964 50
- 496964 Page 43 51
- Fitting a Battery 52
- Initial Start Up 52
- 496964 Page 45 53
- Page 46 496964 54
- 4. PROGRAMMING 55
- Page 48 496964 56
- 496964 Page 49 57
- Page 50 496964 58
- 496964 Page 51 59
- Page 52 496964 60
- 496964 Page 53 61
- Page 54 496964 62
- 496964 Page 55 63
- Leaving Programming Mode 64
- Performing an Engineer Reset 64
- Re-entering Programming Mode 65
- Page 58 496964 66
- Adding and Deleting Tags 67
- To Delete a Tag 68
- 0: Country PTT Defaults 69
- Page 62 496964 70
- 496964 Page 63 71
- Page 64 496964 72
- 496964 Page 65 73
- Page 66 496964 74
- 496964 Page 67 75
- 20: Change Engineer Code 76
- 21: Zone Configuration 77
- 22: Loudspeaker Chime 77
- 23: Remote Reset 77
- Page 70 496964 78
- 28: Hide Status Display 79
- 29: Entry Alarm Delay Time 79
- 30: PA Response 79
- 31: Zone Tamper Reset 79
- 32: Keypads and Partitions 80
- 33: System Reset 80
- 34: PA Reset 80
- 35: First Circuit Lockout 81
- 36: Alarm Abort 81
- 38: System Tamper Reset 81
- Page 74 496964 82
- 40: System Auto Rearm 83
- 41: Bell Delay 84
- 42: Bell Duration 84
- 43: Level A Entry Time 84
- 45: Entry/Exit Tone Volume 85
- 46: Tamper Alarm Response 85
- 49: Not used 86
- 50: CSID Code 86
- 51: Set Time and Date 87
- 52: Omit Alarm 87
- 53: Abort Reset 87
- 55: Not used 88
- 59: External Sounder Tamper 89
- 64: Level B Entry Time 90
- 66: Forbikobler Partitions 91
- 67: Forbikobler Approved 91
- 68: Forbikobler Door Timer 92
- 69: Forbikobler Door Locking 92
- 496964 Page 85 93
- 74: Level C Entry Time 94
- 496964 Page 87 95
- 78: Level D Entry Time 96
- 80: Forbikobler Chime 97
- 81 to 84: Output n Type 97
- Page 90 496964 98
- 86: Dual Ply Entry Warning 99
- 4. Programming 100
- Page 92 496964 100
- 98: Load Full Defaults 101
- 99: Leave Programming Mode 101
- 100: Not used 101
- 101: Call Mode 102
- 102: Not used 102
- 104: Not used 103
- 105: Static Test Call 103
- 103: Reporting Type 103
- 106: Line Fault Response 104
- 107: Not used 104
- 108: Dynamic Test Call 105
- 110: Download Mode 105
- 111: Modem Speed (9851 only) 106
- 112: Rings to Answer 106
- 113: Answer on One Ring 106
- 114: Access Mode 107
- 117: Account Number 108
- 121: Fast Format Channels 109
- 123: Report Restores 110
- 124: Reverse Open/Closed 110
- 126: Select Language 111
- 127: Not used 111
- 130: Not used 112
- 131: SIA Report Mode 112
- 134 to 142: Not used 115
- 144 to 150: Not used 116
- 159: Invert Plug-by Outputs 117
- 160: Confirmed Alarm Timer 117
- Page 110 496964 118
- 165 to 169: Not used 119
- 176 to 179: Not used 120
- 180: Print Log (9851 only) 121
- 181: Enable Guard Code 121
- 183: Set Display Line 2 121
- 185: Keyswitch Auto Reset 122
- 186: Set Home Beep Calls 122
- 187 to 190: Not used 122
- 4. Programming 123
- 496964 Page 115 123
- 200: Forbikobler Entry Timer 124
- 496964 Page 117 125
- Using a Partitioned System 126
- Programming Partitions 127
- Common Areas 129
- Page 122 496964 130
- 496964 Page 123 131
- Page 124 496964 132
- 496964 Page 125 133
- ACPO DD243: 2002 Compliance 134
- Alarm Filtering 135
- Page 128 496964 136
- 5. TESTING 137
- Event Log Messages 138
- 91 to 96: Testing Outputs 140
- 97: Engineer Walk Test 141
- 5. Testing 142
- Page 134 496964 142
- 496964 Page 135 143
- Page 136 496964 144
- Index 145
- 496964 Page 137 145
- Page 138 496964 146
- Declaration of Conformance 147
- 9751/9752/9851 147
Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Cooper Security 9751
(88 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.055 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern