Cooper Security Homelink 75 Betriebsanweisung PDF herunterladen (Seite 72)

Programming Reference - Reporting 7510r

Page 68

User Menu. A user can enter a new telephone number in

this slot at will. This allows the user to re-direct any

speech message programmed for this slot.

Report Triggers

In the 7510r you can link up to five different trigger

events to each speech message. A trigger event is one

item selected from a list of alarm types.

To link specific trigger events to individual messages

select Alarms, Speech Dialler, Report Triggers.

The display shows a list of voice messages. (Note that the

home message does not appear. The control unit always

sends the home message at the beginning of each

transmission.) Select the message that you wish to

program. The display then shows a list of five triggers.

Select a trigger and the display shows a list of available

alarm events. Select one alarm event for that trigger.

When you have selected an alarm event the display

shows the list of triggers again. You may program one

alarm event for each of the five triggers in the list.

When you finish selecting alarms for each trigger, you

have now linked alarm events to triggers, and one or

more triggers to a message.

Destinations

Once you have programmed telephone numbers,

messages and triggers, you must then link specific

messages to individual telephone numbers. To do this

select

Reporting, Speech Dialler, Destinations

Select a message from the list on the display. The control

unit will show you a list of telephone numbers. If you

gave a telephone number a name then the display shows

the name instead of the digits of the number.

Highlight a telephone number and press CHANGE until a

“Yes” appears after the number. Press DONE when you

have finished. The control unit will send the selected

speech message to every telephone number with a “Yes”

next to it.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 83 84

Keine Kommentare

Cooper Security Homelink 75 Betriebsanweisung Seite 72