Cooper Security Homelink 75 Betriebsanweisung PDF herunterladen (Seite 22)

Programming Reference - Detectors 7510r

Page 18

Deleting a Single Detector

To delete an individual detector select

Detectors, Add/Del

Detectors from the Installer Menu.

Select a zone showing the

icon.

The display offers you the choice of deleting the detector

ID or defaulting the zone.

If you select “Delete Detector ID” then the control unit

“forgets” the ID of the detector, but leaves any zone

programming in place.

If you select “Default Zone” then the control unit

“forgets” the ID of the Detector and sets all the zone

programming back to default values: Type = Not Used,

no attributes, zone assigned to Partition 1.

To reinstate the detector you must teach the control unit

that detector's identity again.

To delete a hardwired zone (zones 33 and 34) select

Detectors, Edit Detectors

, select zone 33 or 34 as required

and set the type to Not Used.

Edit Zones

The 7510r has two sorts of zones: radio and hardwired.

The control unit allocates the radio zones to zones 1 to 32

and the two hardwired zones to zones 33 and 34. (To

obtain access to the contacts for the hardwired zones see

Figure 5 on page 4.)

Once you have made the control unit learn radio

detectors or connected the hardwired zones then you can

program each zone's behaviour.

Names, Types, Partitions and Attributes

To change the name associated with a zone, or its type,

partition or attributes select Detectors, Edit Zones followed

by the zone number.

The display shows a summary of zone 1’s current details.

Press u or n to show the other zones’ details. When you

have highlighted the zone you wish to edit press SELECT.

The display shows a short list of the items that you can

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 83 84

Keine Kommentare

Cooper Security Homelink 75 Betriebsanweisung Seite 22