Cooper Security M2000 Betriebsanweisung PDF herunterladen (Seite 60)

Engineer Menu 1-4 Engineering Manual

126 – Custom O/P 8 On

Activates when custom output 8 (page 41) activates.

127 to 128 – Always Off

This output never activates.

129 – Time Switch 1 On

Activates while time switch 1 (page 66) is active.

130 – Time Switch 2 On

Activates while time switch 2 (page 66) is active.

131 – Time Switch 3 On

Activates while time switch 3 (page 66) is active.

132 – Time Switch 4 On

Activates while time switch 4 (page 66) is active.

133 – Time Switch 5 On

Activates while time switch 5 (page 66) is active.

134 – Time Switch 6 On (not M800)

Activates while time switch 6 (page 66) is active.

135 – Time Switch 7 On (not M800)

Activates while time switch 7 (page 66) is active.

136 – Time Switch 8 On (not M800)

Activates while time switch 8 (page 66) is active.

137 – Time Switch 9 On (not M800)

Activates while time switch 9 (page 66) is active.

138 – Time Switch 10 On (not M800)

Activates while time switch 10 (page 66) is active.

139 to 148 – Always Off

These outputs never activate.

149 – Supervision Fail

This output operates when there is a supervision failure on any radio zone. The output

remains on until the alert is reset. See also option 1-9-3-17.

The control unit operates the General Fault System Output at the same time as the

Supervision Failed System Output.

150 – RF Jammed

The control unit operates this output when any MRNode reports jamming. The output

remains on until all jammed MRNodes report no jamming.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 179 180

Keine Kommentare

Cooper Security M2000 Betriebsanweisung Seite 60