Cooper Security M2000 Spezifikationen PDF herunterladen (Seite 3)

M2000 Installation Instructions 3

Introduction

Figure 1 and Figure 2 show the layout of the control

panel and the main features of the printed-circuit

board (PCB).

The panel includes a wealth of features, including:

• Eight on-board zones.

• Two network ports for the connection of keypads,

MSNodes and MRNodes (see Figure 3). The

additional network devices enable the system to

be expanded up to 264 zones.

• Serial and USB connectors for local connection of a

PC running the Downloader configuration and

monitoring software.

• An on-board modem connected to PSTN and RJ11

ports to enable remote connection to a remote

alarm receiving centre or to a PC running the

Downloader software.

• Switched-positive, switched-negative and voltage-

free programmable outputs.

• 16-channel digital communicator outputs for

connection to an alarm receiving centre or to

provide additional programmable outputs.

• Engineer keypad port.

• CPA6 output port to provide additional

programmable outputs.

• Serial printer port.

This leaflet describes how to install the control panel. If

you need a general overview of its features, please

refer to the

M2000/M800/M750 Engineering Manual

If you require details of how to install keypads or other

ancillary devices, please refer to their separate

installation instructions.

At the publication of this manual, the MKP1, CPA6,

MIDNode and IDNode are no longer available for sale.

This manual includes details of these products in case

you are fitting a M2000 control unit to older M-series

alarm systems with these products.

Note: Before connecting any external devices to the

control panel, make sure that it is able to provide

sufficient current to power such devices, as described

on page 14.

Fixing hole (1 of 3)

Printed circuit

board (PCB)

Fused terminal block Mains terminal block

Mains transformer

Back tamper

switch

mounting slots

Mains cable

entry ONLY

Battery

position

Fixing hole

(2 of 3)

Fixing hole

(3 of 3)

Figure 1: Control Panel Layout

1 2 3 4 5 6 7 8 ... 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Cooper Security M2000 Spezifikationen Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Cooper Security M2000