Cooper Security i-on16 Installationsanleitung PDF herunterladen (Seite 17)

i-on16 2. Alarms

Page 17

1. Make sure it is safe to

enter the premises:

2. Either key in your access

code





OR present your proximity

tag.

The bottom line of the display

shows the first zone to alarm.





3. Press  or  to see the name

of the zone (if the installer has

programmed one), for

example:







4. Press  to reset the system.

The system returns to

standby, and is ready to set

again. (The top line may show

the installer‟s name.)





Notes:

1. The control unit logs the alarm information.

You can reset the system (step 4 above)

without losing information about the cause of

the alarm. See page 52 for instructions on

how to read the log.

2. The alarm system may be connected to a

communications network, and send alarm

messages to one or more alarm receiving

centres. If the alarm started by accident,

phone the relevant centres and tell them.

If you return to the control unit

after the sirens have stopped and

key in your access code then the

red LEDs around the navigation

keys glow to tell you that an alarm

has occurred.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 89 90

Kommentare zu diesen Handbüchern

Keine Kommentare

Cooper Security i-on16 Installationsanleitung Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Cooper Security i-on16