Cooper Security 9751 Installationsanleitung PDF herunterladen (Seite 24)

18 496792

3. Installation

Keypad Backlight

When supplied from the factory the control unit is configured with the keypad

backlight ON. To turn the keypad backlight OFF remove the jumper from the

"ON BACKLIGHT" link, shown in Figure 9.

Connecting Keypads, Exit Terminate Buttons, Lock Switches

and Sounders

Figure 10 shows the connections for any of the remote keypads.

To connect an exit terminate button use the "ET" terminals on the keypad

PCB. See Figure 10.

Use the "ET" terminals to connect a Lock Switch. If using a lock switch do not

connect any other device to the "ET" terminals.

Figure 10 shows the connections for the internal and external sounders.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 95 96

INSTALLATION AND 1
PROGRAMMING GUIDE 1
Contents 3
1. INTRODUCTION 7
2 496792 8
496792 3 9
System Features 10
Detectors 10
9954 Hardwired Expanders 10
9955 Radio Expander 10
User Control 11
6 496792 12
2. Technical Description 13
Control Unit PCB 14
496792 9 15
9954 Expander 16
Compatible Equipment 17
12 496792 18
3. INSTALLATION 19
Cabling Keypads and Expanders 20
Fitting the System 21
Fitting the Control unit Case 21
Fitting a 9930 LCD Keypad 21
Wiring the Control Unit 22
Cable Entries 22
Mains Connection 22
Remote Keypads 23
18 496792 24
496792 19 25
Detector Circuit Connections 26
Connecting Expanders 27
Using Programmable Outputs 28
Wiring Keyswitches 29
Using a Communicator 29
Internal Communicator 29
Telephone Line 29
Line Monitoring 30
Statutory Information 30
Application 30
Compatible PABXs 30
Approval 30
Safety Notice 31
Connecting the Telephone Line 32
496792 27 33
28 496792 34
496792 29 35
Fitting a Battery 36
Initial Start Up 37
32 496792 38
4. Programming 39
34 496792 40
496792 35 41
36 496792 42
496792 37 43
38 496792 44
496792 39 45
Communications Programming 46
496792 41 47
42 496792 48
Leaving Programming Mode 49
Engineer Reset 49
Re-entering Programming Mode 49
Programming Reference 50
Country Defaults (Command 0) 50
496792 45 51
46 496792 52
496792 47 53
Analyser zone types 54
496792 49 55
RedCare Reset (Command 23) 56
Status Display (Command 28) 57
System Reset (Command 33) 58
PA Reset (Command 34) 59
Alarm Abort (Command 36) 59
54 496792 60
Bell Delay (Command 41) 61
Bell Duration (Command 42) 61
CSID Code (Command 50) 62
Abort Reset (Command 53) 63
Sounder Tamper (Command 59) 64
496792 59 65
60 496792 66
496792 61 67
62 496792 68
496792 63 69
Guide”.) 70
Call Mode (Command 101) 71
Reporting Type (Command 103) 72
Dynamic Test (Command 108) 73
Rings to Answer (Command 112) 74
Access Mode (Command 114) 75
Account Number (Command 117) 76
496792 71 77
72 496792 78
(Command 125 (9752 only)) 79
Select Language (Command 126) 79
Report Mode (Command 131) 80
496792 75 81
76 496792 82
496792 77 83
78 496792 84
ACPO DD243: 2002 Compliance 85
Alarm Filtering 86
5. Testing 87
82 496792 88
496792 83 89
84 496792 90
496792 85 91
86 496792 92
496792 87 93
88 496792 94
DECLARATION OF CONFORMA NCE 96

Kommentare zu diesen Handbüchern

Keine Kommentare

Cooper Security 9751 Installationsanleitung Seite 24

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Cooper Security 9751