Cooper Security i-on40 Bedienungsanleitung PDF herunterladen (Seite 29)

i-on40 Administration

Page 25

The bottom line of the display shows the first item of the

System Configuration menu.

2. Press u or n to scroll through the options available, followed

by > to gain access to an option.

Switching the Chime On/Off

The installer may have set up your alarm system to give a chime

tone whenever something triggers one or more detectors while

the system is unset. If you wish to switch this feature off (or on)

then:

1. Enter the Menu and select System Config – Facilities On/Off.

The bottom line of the display shows the current state of the

chime feature, for example “Chime On” if chime is currently

working.

2. Press > till the bottom line of the display shows the status

you want (for example “Chime Off” if you want to silence the

chime feature).

3. Press Y to leave the option when you have finished making

changes.

Setting the Date and Time

You will need to re-program the date and time if the control unit

loses power for an extended time, and the battery is exhausted.

1. Enter the Menu and select System Config – Set Date & Time.

The top line of the display shows “Set the date” and the

bottom line shows the current date in number format

(day/month/year). The day is highlighted.

2. Key in the digits for the day/month/year (use leading

zeroes). Press Y when you have finished.

The top line of the display shows “Set the time” and the

bottom line of the display shows the current time in 24 hour

numerical format (hours: minutes). The hours are

highlighted.

3. Key in the hours and minutes (user leading zeroes). Press Y

to finish.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Keine Kommentare

Cooper Security i-on40 Bedienungsanleitung Seite 29