Cooper Security 9853 Installationsanleitung PDF herunterladen (Seite 66)

4. Programming

60 496791

set B will continue to act as Final Exit zones during part set B. When the

option is set to 1 any Final Exit zones included in part set B will act as Normal

Alarm zones during part set B.

Level B Entry Route Response (Command 61)

Command 61 controls how the system treats Entry Route zones during part

set B. (This Command does not affect Partition B in a Partitioned system.)

When the option is set to 0 all Entry Route zones included in part set B will

continue to act as Entry Routes during part set B. When the option is set to 1

any Entry Route zones included in part set B will act as Final Exit zones

during part set B.

Level B Exit Mode (Command 62)

Command 62 specifies the exit mode for part set B or Partition B. For a

single system the options are:

Option 0 The keypad sounders and any internal sounders give a low tone

when entering part set Level B. Use Command 65 to select the

exit time.

Option 1 Instant Set (no exit tone)

Option 2 Silent Set. Use Command 65 to program the Exit time. At the end

of the exit time the keypad gives a double beep confirmation tone.

Option 3 Makes the Level B exit mode the same as Level A.

For a partitioned system the options are:

Option 0 (UK default) The keypad sounders and any internal sounders give

a full tone when setting Partition B. Use Command 65 to select the

exit time.

Option 1 Terminate. Use this option if the user completes setting the

Partition by pushing an exit terminate button connected to a

keypad. Note that the exit time is infinite in this option.

Option 2 Final door set. Use this option to complete setting the Partition by

closing a door fitted with a Final Exit zone detector. Note that the

exit time is infinite in this option.

Option 3 Instant Set (no exit tone)

Option 4 Silent Set. Use Command 65 to program the Exit time. At the end

of the exit time the keypad gives a double beep confirmation tone.

Option 5 Lock Set. See “Level A Exit Mode (Command 39) for an explana-

tion of Lock Set.

Note that the keypads give a double beep confirmation tone at the end of all

setting modes.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 101 102

Keine Kommentare

Cooper Security 9853 Installationsanleitung Seite 66