Cooper Security 9853 Installationsanleitung PDF herunterladen (Seite 41)

4. Programming

496791 35

To change: Key-in: Notes Default

Tamper Alarm Response 46 0 Internal sounders

(Single system only.) 1 Keypad sounders

2 Internal and keypad sounders Y

Part’n A Alarm Response 47 0 Keypad sounders

(Partitioned system only.) 1 Local Alarm

2 Full Alarm Y

Lockout Kpds During Entry 48 0No

1 Yes

CSID Code 50 n....n Seed code for remote reset none

Set Time and Date 51 ..... see “Setting Time and Date”

Omit Tamper Allowed 52 0 Alarm contacts only Y

1 Alarm plus tamper contacts

Abort reset 53 0 Abort System Y

1 Abort User

BVVO Superv’n Response 54 0 Disabled Y

1 Enabled

4/6 Digit Access Codes 56 0 Four digit codes Y

1 Six digit codes

Battery Load Test 57 0 Disabled Y

1 Enabled

Day Tamper Indication 58 0 User Reset Y

1 Installer Reset

Sounder Tamper 59 0 Negative voltage tamper return Y

1 End of line 2k2 resistor.

Level B final exit operation 60 0 B=FE = FE (Final exit) Y

1 B=FE = NA (Normal alarm)

Level B Entry route 61 0 B=ER = ER (Entry route) Y

1 B=ER = FE (Start entry timer)

Level B Exit Mode 62 n

For a single system n is one of the following:

0 Timed plus low tone Y

1 Instant set

2 Silent set (kpd beeps at end of setting period)

3 Exit mode same as Level A

For a partitioned system n is one of:

0 Timed full tone Set (default) 3 Instant set

1 Terminated 4 Silent (kpd beeps at end of setting period)

2 Final door 5 Lock Set

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 101 102

Keine Kommentare

Cooper Security 9853 Installationsanleitung Seite 41