Cooper Security i-on160EX Bedienungsanleitung PDF herunterladen (Seite 5)

i-on40 & i-onEX Range

Page v

Compliance Statement

The i-on50EX and i-on160EX:

Are suitable for use in systems designed to comply with

PD6662:2010 at Grade 2, Grade 3 and environmental class

II.

Are suitable for use in systems designed to comply with the

requirements of EN50131-3 at Grade 2, Grade3 and

environmental class II.

Comply with the requirements of EN50131-6:2008 at Grade

2, Grade 3 and environmental class II.

The i-on30EX and i-on40:

Are suitable for use in systems designed to comply with

PD6662:2010 at Grade 2, and environmental class II.

Are suitable for use in systems designed to comply with the

requirements of EN50131-3 at Grade 2 and environmental

class II.

Comply with the requirements of EN50131-6:2008 at Grade

2 and environmental class II.

When fitted with the appropriate communicator these products

are compliant with EN 50136-1. They allow the alarm

transmission system to meet the performance requirements of EN

50131-1:2006 ATS 2 provided that:

a) They are installed in accordance with the installation

instructions.

b) The connected PSTN is functioning normally.

If the installer selects a non-compliant configuration then

they must remove or adjust compliance labelling

Please Note:

This Guide applies to i-on control units with version 4.00 software.

1 2 3 4 5 6 7 8 9 10 ... 121 122

Keine Kommentare

Cooper Security i-on160EX Bedienungsanleitung Seite 5