Cooper Security i-on 16 Betriebsanweisung PDF herunterladen (Seite 21)

i-on16 Installation

Page 17

If you wish run mains cable through the side of the case,

make sure that they are horizontal for the last metre

before entering the case.

Mains Connection

Figure 13 shows the mains connection. Connect to a

suitable supply using a double pole disconnect device in

accordance with EN60950-1.

T 400mA 250

230V ~50Hz 200mA

Figure 13. Mains Connection

Caution: Do not apply power at this point.

4. Connect Wired Peripherals

The end station pcb provides four connectors for wired

outputs. Each of these outputs is driven by a transistor,

and is capable of sinking a maximum 500mA when

active. The outputs are 0V when active, +12V when

inactive.

Figure 14 shows examples of connecting wired

peripherals.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 67 68

Keine Kommentare

Cooper Security i-on 16 Betriebsanweisung Seite 21