Cooper Security 9651 Betriebsanweisung PDF herunterladen (Seite 26)

3. After an Alarm

Page 26 496930

Setting the Time and Date

The control unit contains an internal clock/calendar that runs as long as

there is power present (mains or stand-by battery). The system uses this

clock to mark the time and date on the system log. If the power supply fails

for any reason, and the stand-by battery is low, then the system loses track

of the correct time and date. You may also need to change the time if you

live in a country that uses summer/winter time. User 01 is the only access

code that can change the time and date.

To set the time and date:

Key in User 01 access code or present a

tag

2. Press 6.

The display shows the date.

Key in two digits for the day followed by Y .

Key two digits for the month (01 for January, to 12 for December)

followed by Y .

Key in two digits for the year, followed by Y .

The display shows the time.

Key in two digits for the hour followed by Y.

(Use the 24 hour clock.)

Key in two digits for the minutes, followed by Y.

The display shows the new time and date:

Turning the Chime On/Off

Your system may be programmed so that a chime tone sounds whenever

certain doors are opened while the system is unset. To turn Chime on or off:

1. Key in your access code or present a tag

2. Press 7.

The display shows:

(Press 7 again to toggle Chime OFF.)

Press Y.

D04 M11 Y99

H17 M02

11/09/01/ 08:45

Chime = ON

1 2 ... 21 22 23 24 25 26 27 28

Keine Kommentare

Cooper Security 9651 Betriebsanweisung Seite 26